Webcams and non-IP based cameras are not supported directly by Live Cams. These devices are instead supported through third-party software running on a PC or Mac computer. Examples of this are webcamXP, EvoCam, Blue Iris, Iris, AbelCam, SecuritySpy and IVC Relay Server. See the documentation for those products to determine compatibility.
Devices must transmit a standard MJPEG format to be used in this application. MPEG4 and H264 content cannot be streamed using the Apple iPhone SDK due to lack of RTSP support.
Models listed have been verified to receive and display still images and/or streaming video via Live Cams. Additional models may also work but please contact support to verify.
Some cameras also have PTZ support in Live Cams. Not all PTZ features may be supported (such as presets or auto-patrol).
| Manufacturer |
PTZ support |
Model / Notes |
 |
No |
DVRs and NVRs (v6.0) |
| Abelcam |
Yes |
Any. |
| ABS IPCam |
Yes |
Any. |
 |
Yes |
Eyseo IP Cameras. MJPEG must be enabled. |
 |
Yes |
ACM series only, Firmware 3.11.11 or above |
 |
Yes |
AIC250W, AIC500, SkyIPCam 747, 777 |
 |
No |
2211 |
 |
No |
MegaVideo HD, SurroundVideo |
 |
Yes |
Megapixel IP Cameras |
 |
Yes |
Mole |
 |
Yes |
9070 |
 |
Yes |
Fixed cameras:
205, 206, 207, 207MW, 207W, 210, 210A, 211, 211A, 211M, 211W,
221, 223M, M1011, M1011-W, M1031-W, P1311, Q1755
Fixed dome:
209FD, 209FD-R, 209MFD, 209MFD-R, 216FD, 216FD-V, 216MFD, 225FD,
M3011, M3014, P3301, P3301-V, P3343, P3343-V, P3343-VE, P3344,
P3344-V, P3344-VE
PTZ:
212, 213, 214, 215
PTZ Dome:
231D+, 232D+, 233D, Q6032-E
Older models:
2100, 2110, 2120, 2130, 2420, 2400, 2401, 2400+, 2411, 2460, 205, 206W
|
 |
Yes |
VC-C4R, VB-C50i/R, VB-C60, VB-C300, VB-C10/R, VB101, VB150 |
| Blue Iris |
No |
Any cameras supported by Blue Iris Software (snapshots only). |
 |
No |
Bosch MJPEG cameras |
 |
Yes |
PVC2300, PVC300, WVC210, WVC2300
These devices currently use the Cisco and Linksys camera profiles in Live Cams. |
 |
Yes |
IP70, IP540, IP530 |
 |
Yes |
MJPEG IP camera models |
 |
Yes |
900, 2000, 2100, 2120, 2121, 3110, 3420, 5220, 5300, 5610, 6620 (950 is unsupported) |
 |
Yes |
IC-1000 |
 |
Yes |
Vilar, Advance, EM4482 |
 |
No |
Any cameras supported by EvoCam Software. |
 |
Yes |
All MJPEG models. |
 |
Yes |
300 series video servers, PTZ IP cameras |
 |
Yes |
All MJPEG models |
| Generic MJPEG |
No |
Cameras that support a Motion JPEG stream on FireFox or Safari browsers can be linked if you know the URL to the video stream. |
 |
No |
550710, 550253, 550338, Speed Dome |
 |
No |
IPX DDK single and multichannel devices |
 |
No |
IQEye |
 |
Yes |
All cameras hosted by IVC Relay Server software |
| JPG/GIF/PNG stills |
No |
A URL to a still image (from cameras or just from any image on the web) can be added to Live Cams and refreshed on a defined interval. |
 |
No |
MJPEG and JPEG cameras from JVC |
 |
Yes |
IPS0/1/2/3, IPR4, IPD5, PIH-036038, PVS-1020, PIH 7000/7600/7625/7622/7635, PDR-400, NVR104, NVR108, NVR116 |
 |
Yes |
Tested on various WCS and FCS models (1060, 2060, 5011). Others may be supported but remain untested at this time. |
 |
Yes |
WVC54GCA, WVC200, WVC210 (WVC54G and WVC54GC models are unsupported). Cameras must be set to JPEG output mode. |
 |
No |
Video servers |
 |
No |
Any |
| NetMedia |
Yes |
iViewHD |
 |
Yes |
HCM-8, HCM-10, HCM-11, HCM-230, HCM-250, HCM-270, HCM-280, HCM-311, HCM-331, HCM-371, HCM-381, HCS-301A and any other Panasonic HCM series models
KX-HCM10, KX-HCM230, KX-HCM250, KX-HCM270, KX-HCM280
BL-C1, BL-C10A BL-C30A, BL-C1A, BL-C20A
i-Pro camera series
|
 |
Yes |
IP110, IP3701, Spectra IV IP, Spectra Mini IP |
 |
No |
All models |
 |
No |
ICA-108/310/312/350/525/530/601/651, IVS-110/220M |
 |
No |
IP 1000a |
 |
No |
SNC B2315, B5395, M300, C622x, C7478 |
| SecuritySpy |
Yes |
Any |
 |
Yes |
SNC-Z20, SNC-Z20P, SNC-RZ25P, SNC-RZ20, SNC-RZ30, SNC-CS3, SNC-P1, SNC-P5, SNT-V501, SNC-RX530P, SNC-RX550, SNC-RX570P |
 |
No |
Express, NetCam |
 |
Yes |
IK-WB01A, IK-WB11A, IK-WB21A, IK-WB15A |
 |
Yes |
All currently supported models (110, 212, 312, 422, 252, 121, 201, 301, 100-N, 400, 600, 501, 410) |
 |
No |
All IPX DDK single and multichannel devices |
| Veo |
Yes |
Veo Observer (and wireless) via Trendnet profiles |
 |
Yes |
7000 series cameras or video servers, older MJPEG models. Cameras must have stream 1 or stream 2 configured to output MJPEG video. |
 |
Yes |
All models supported by webcamXP software. |
|
 |
No |
All models |
 |
No |
7610, 7611 |